utp gbic in X670G2-48x-4q

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered

I have a X670G2-48x-4q switch and placed a BASET transceiver In the log I noticed the message:

<Warn:HAL.Port.OpticCfgCflct> The configuration for the BASET optic module is not correct - please configure port 40 for auto-negotiation On and speed 1000.

For some reason a 100 mb device cann't get a link on the switch.

Are 100 Mb devices not supported on the X670?

Photo of Johan Hendrikx

Johan Hendrikx

  • 3,876 Points 3k badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Alexandr P

Alexandr P, Embassador

  • 12,768 Points 10k badge 2x thumb
Hello, Johan!

You can see this at the documentation, for example:
Data Sheet
EXTERNAL PORTS – X670-G2-48X-4Q
48 ports 10GBASE-X SFP+ (1Gb/10Gb dual speed)

Summit Family HW Install Guide
The Summit X670-G2-48x-4q and X670-G2-72x have SFP+ ports that support dual interface speeds ofGigabit Ethernet and 10-Gigabit Ethernet.

Thank you!
Photo of Bill Stritzinger

Bill Stritzinger, Alum

  • 6,036 Points 5k badge 2x thumb
You are correct, the combo ports will only operate at 1 Gig, they will not run at 100MB.  The only X670 that supports 100MB is X670-48t.
Photo of Johan Hendrikx

Johan Hendrikx

  • 3,876 Points 3k badge 2x thumb
Thanks for the information