SummitStack-V between X450-G2 & X460-G2 using 10GBE
Is it possible to build “SummitStack-V” between X450-G2 & X460-G2 using 10GBE.Do I need anything else as the two Switchches and four SFP+ modules?Licenses? what ever? Cheers Joe
Forum Posts
UPM Configuration error
Good Evening, what is wrong ?I want to detect a phone with OUI.ThankGiuseppe************Profile Contents Begin************#MAC OUI VLANs#@VariableFieldLabel "MAC OUI Number 1 (xx:xx:xx:)"set var MAC1 00:1A:E8:#@VariableFieldLabel "VLAN for MAC OUI Nu...
Resolved! OSPF establishes full adjacency but unable to ping P2P link.
Hi Currently have a strange networking issue, see the diagram below: This shows two stacked EXOS switches in each data centre which are joined via MLAG. There is an active / passive firewall. There exists 4 x /30 P2P links on the active firewall, 2 g...
MLAG y VRRP (Active/Backup) Error change role
Hello:I am currently conducting an operation laboratory for MLAG and VRRP, for which I have 3 x440-G2 switches all with firmware version 22.5.1.7 patch1-3. Having the following scheme: All links are formed through LACP L2, I have the inconvenience t...
VRRP critical Error
hiSw#1 Link down after SW#2 (B) Issue log create SW1# VRRP (M) ------------(HA-Link Interlink)--------------- SW#2VRRP(B) ← Backup switch VRRP Critcal Log - - ...
