Extreme Networks

Hi all,The AP has 2 gigabit ports: ETH0 and ETH1. on ETH0 I connect the AP to the network, and on ETH1 I was connecting another device to the network (like a dhcp relay)I just updated my AP550 from 10.5.3 to 10.6.1.1 and the setup is broken - the con...

Hi all,I have a question: I use an ap550 as simple Access point to broadcast 3 SSIDs.The AP is connected via ETH0 on POE. I have the ETH1 free and I intend to connect a home appliance device which requires cable connection to it. Is it possible forwa...

Hi all,I have 2 APs at home. the primary one acting as mesh portal (ap250) is wired connected and broadcasts only 5G wifi and the second AP which is meshed (ap230) on the 5g interface (wifi1) and it's set on Backhaul Mesh Link and Client Access mode....

Hi guys, Is there a way i can hard reset an AP230? thank you Mihai

Hi guys,I own an AP 230. I'm not able to config the agg0 for eth0 and eth1 from the CLI. can yoy please help me here?for example:interface eth0 bind agg0 bind agg0                 ^-- unknown keyword or invalid inputis not ding anything. Thank you