how-to aggregation from CLI

[mihai_balaci]

Hi guys,

I own an AP 230. I'm not able to config the agg0 for eth0 and eth1 from the CLI. can yoy please help me here?

for example:

interface eth0 bind agg0 bind agg0

                 ^-- unknown keyword or invalid input

is not ding anything.

Thank you

[mihai_balaci]

this is how my config looks today:

show run

security mac-filter VHM-UQIASSAP default permit

security mac-filter AeroHive-guest default permit

security mac-filter AeroHive default permit

radio profile radio_ng_ng0

radio profile radio_ng_ng0 phymode 11ng

radio profile radio_ng_ng0 acsp access channel-auto-select time-range 01:00 04:00

no radio profile radio_ng_ng0 backhaul failover

radio profile radio_ng_ng0 interference-map enable

radio profile radio_ng_ng0 short-guard-interval

radio profile radio_ng_ng0 benchmark phymode 11b rate 11 success 60 usage 50

radio profile radio_ng_ng0 benchmark phymode 11b rate 5.5 success 70 usage 50

radio profile radio_ng_ng0 benchmark phymode 11g rate 36 success 70 usage 50

radio profile radio_ng_ng0 benchmark phymode 11g rate 24 success 80 usage 50

radio profile radio_ng_ng0 benchmark phymode 11a rate 36 success 70 usage 50

radio profile radio_ng_ng0 benchmark phymode 11a rate 24 success 80 usage 50

radio profile radio_ng_ng0 benchmark phymode 11n rate mcs4/2 success 80 usage 50

radio profile radio_ng_ng0 benchmark phymode 11n rate 54 success 70 usage 50

radio profile radio_ng_ng0 benchmark phymode 11ac rate mcs2/2 success 80 usage 50

radio profile radio_ng_ng0 benchmark phymode 11ac rate 54 success 70 usage 50

radio profile radio_ng_ng0 frameburst

radio profile radio_ng_ac0

radio profile radio_ng_ac0 phymode 11ac

radio profile radio_ng_ac0 acsp access channel-auto-select time-range 01:00 04:00

radio profile radio_ng_ac0 interference-map enable

radio profile radio_ng_ac0 interference-map cu-threshold 35

radio profile radio_ng_ac0 interference-map crc-err-threshold 35

radio profile radio_ng_ac0 short-guard-interval

radio profile radio_ng_ac0 benchmark phymode 11b rate 11 success 60 usage 50

radio profile radio_ng_ac0 benchmark phymode 11b rate 5.5 success 70 usage 50

radio profile radio_ng_ac0 benchmark phymode 11g rate 36 success 70 usage 50

radio profile radio_ng_ac0 benchmark phymode 11g rate 24 success 80 usage 50

radio profile radio_ng_ac0 benchmark phymode 11a rate 36 success 70 usage 50

radio profile radio_ng_ac0 benchmark phymode 11a rate 24 success 80 usage 50

radio profile radio_ng_ac0 benchmark phymode 11n rate mcs4/2 success 80 usage 50

radio profile radio_ng_ac0 benchmark phymode 11n rate 54 success 70 usage 50

radio profile radio_ng_ac0 benchmark phymode 11ac rate mcs2/2 success 80 usage 50

radio profile radio_ng_ac0 benchmark phymode 11ac rate 54 success 70 usage 50

radio profile radio_ng_ac0 frameburst

radio profile AP150W-11ng-Profile

radio profile AP150W-11ng-Profile phymode 11ng

radio profile AP150W-11ng-Profile acsp use-last-selection

radio profile AP150W-11ng-Profile interference-map enable

radio profile AP150W-11ng-Profile short-guard-interval

radio profile AP150W-11ng-Profile benchmark phymode 11b rate 11 success 60 usage 50

radio profile AP150W-11ng-Profile benchmark phymode 11b rate 5.5 success 70 usage 50

radio profile AP150W-11ng-Profile benchmark phymode 11g rate 36 success 70 usage 50

radio profile AP150W-11ng-Profile benchmark phymode 11g rate 24 success 80 usage 50

radio profile AP150W-11ng-Profile benchmark phymode 11a rate 36 success 70 usage 50

radio profile AP150W-11ng-Profile benchmark phymode 11a rate 24 success 80 usage 50

radio profile AP150W-11ng-Profile benchmark phymode 11n rate mcs4/2 success 80 usage 50

radio profile AP150W-11ng-Profile benchmark phymode 11n rate 54 success 70 usage 50

radio profile AP150W-11ng-Profile benchmark phymode 11ac rate mcs2/2 success 80 usage 50

radio profile AP150W-11ng-Profile benchmark phymode 11ac rate 54 success 70 usage 50

radio profile AP150W-11ng-Profile high-density enable

radio profile AP150W-11ng-Profile high-density continuous-probe-suppress enable

radio profile AP150W-11ng-Profile high-density broadcast-probe-suppress enable

radio profile AP150W-11ng-Profile weak-snr-suppress enable

radio profile AP150W-11ng-Profile high-density mgmt-frame-tx-rate high

radio profile AP150W-11ng-Profile weak-snr-suppress threshold 20

security-object AeroHive-guest

security-object AeroHive-guest security protocol-suite wpa-auto-psk ascii-key ***

security-object AeroHive-guest default-user-profile-attr 4000

security-object AeroHive

security-object AeroHive security protocol-suite wpa2-aes-psk ascii-key ***

client-monitor policy default_Policy problem-type association trigger-times 3 report-interval 3600

client-monitor policy default_Policy problem-type authentication trigger-times 3 report-interval 3600

client-monitor policy default_Policy problem-type networking trigger-times 3 report-interval 3600

ssid AeroHive-guest

ssid AeroHive-guest security-object AeroHive-guest

ssid AeroHive-guest security mac-filter AeroHive-guest

ssid AeroHive-guest client-monitor-policy default_Policy

ssid AeroHive

ssid AeroHive security-object AeroHive

ssid AeroHive security mac-filter AeroHive

ssid AeroHive client-monitor-policy default_Policy

hive VHM-UQIASSAP

hive VHM-UQIASSAP security mac-filter VHM-UQIASSAP

hive VHM-UQIASSAP password ***

sdr-profile 150W-SDR-Profile

sdr-profile 150W-SDR-Profile radio-profile-candidate 2g AP150W-11ng-Profile

interface eth0 native-vlan 1

interface eth1 native-vlan 1

interface wifi0 radio tx-power-control auto

interface wifi0 sdr-profile 150W-SDR-Profile

interface wifi1 radio profile radio_ng_ac0

interface wifi1 mode access

interface wifi1 radio tx-power-control auto

interface mgt0 hive VHM-UQIASSAP

interface wifi0 ssid AeroHive-guest

interface wifi0 ssid AeroHive

interface wifi1 ssid AeroHive-guest

interface wifi1 ssid AeroHive

system led power-saving-mode

kddr enable

hostname IronHide

admin read-only admin-ro password ***

admin root-admin admin password ***

interface mgt0 ip 172.16.10.3 255.255.255.0

ip route net 0.0.0.0 0.0.0.0 gateway 172.16.10.1

no interface mgt0 dhcp client

dns server-ip 172.16.10.1

ntp server 0.aerohive.pool.ntp.org

ntp server 1.aerohive.pool.ntp.org second

ntp server 2.aerohive.pool.ntp.org third

ntp server 3.aerohive.pool.ntp.org fourth

clock time-zone 2

clock time-zone daylight-saving-time 03-25 02:59:59 10-28 03:59:59

config version 25243020

config rollback enable

capwap client server name cloud-ie-cws-0.aerohive.com

capwap client server backup name hmng-prd-ie-cwpm-01.aerohive.com

capwap client dtls hm-defined-passphrase *** key-id 1

capwap client vhm-name VHM-UQIASSAP

no capwap client dtls negotiation enable

user-profile default-guest-profile qos-policy def-user-qos vlan-id 1 attribute 4000

ip-policy Guest-Internet-Access-Only

ip-policy Guest-Internet-Access-Only id 1 service DHCP-Server action permit log

ip-policy Guest-Internet-Access-Only id 2 service DNS action permit log

ip-policy Guest-Internet-Access-Only id 3 to 10.0.0.0 255.0.0.0 service any action deny log packet-drop

ip-policy Guest-Internet-Access-Only id 4 to 172.16.0.0 255.240.0.0 service any action deny log packet-drop

ip-policy Guest-Internet-Access-Only id 5 to 192.168.0.0 255.255.0.0 service any action deny log packet-drop

ip-policy Guest-Internet-Access-Only id 6 service any action permit log

user-profile default-guest-profile security ip-policy from-access Guest-Internet-Access-Only

user-profile default-guest-profile ip-policy-default-action permit

application reporting auto

application reporting upload https://cloud-ie.aerohive.com:443/afs-webapp/l7report/71164/ time-window 15 admin VHM-UQIASSAP password *** basic

[mihai_balaci]

Hi,

I tried what you suggested. The device worked. There is an issue with it, however now I calmed down cz i saw it working.

After I did :

reset config bootstrap

reset config

Once the AP rebooted I was able to connect via ssh and make the setup work.

The setup was cleaned every time i was checking the devine via hivemanager on cloud.

I tried to delete all network policies, however my agg0 setup was flushed again.

I tried to delete the device from the cloud, reset all again, and re-add. same story.

[mihai_balaci]

thanks for the effort. I'll do this asap and let you know how It goes.

[AnonymousM]

So with that new code, it still works for me on a stock AP.

Version:      HiveOS 8.4r5 build-210125

Build time:     Wed Sep 26 09:50:29 UTC 2018

Build cookie:    1809260250-210125

Platform:      AP230

Bootloader ver:   v0.0.4.21

TPM ver:      v1.2.37.17

Uptime:       0 weeks, 0 days, 0 hours, 17 minutes, 50 seconds

AH-42db80#show run

interface eth0 bind agg0

interface eth1 bind agg0

system led power-saving-mode 

FWIW, I do not have the 2nd ethernet port plugged in, but I'll reset it and try again with both ports in use and report back.