mihai_balaci
New Contributor III
since ‎09-07-2021
Saturday

User Statistics

  • 23 Posts
  • 0 Solutions
  • 3 Kudos given
  • 1 Kudos received

User Activity

Hi all,I have one AP650 and one AP630 (both Wifi6) the 630 is connected via backhaul to the AP650 on Wifi1 (5ghz)On cable to 650 is connected to a gigabit network, however the connected clients on 630 only get 60Mbps. the speed is super slow. any sug...
Hi all,The AP has 2 gigabit ports: ETH0 and ETH1. on ETH0 I connect the AP to the network, and on ETH1 I was connecting another device to the network (like a dhcp relay)I just updated my AP550 from 10.5.3 to 10.6.1.1 and the setup is broken - the con...
Hi all,I have a question: I use an ap550 as simple Access point to broadcast 3 SSIDs.The AP is connected via ETH0 on POE. I have the ETH1 free and I intend to connect a home appliance device which requires cable connection to it. Is it possible forwa...
Hi all,I have 2 APs at home. the primary one acting as mesh portal (ap250) is wired connected and broadcasts only 5G wifi and the second AP which is meshed (ap230) on the 5g interface (wifi1) and it's set on Backhaul Mesh Link and Client Access mode....
Hi guys, Is there a way i can hard reset an AP230? thank you Mihai
Kudos from
Kudos given to
GTM-P2G8KFN