This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Configuring AP250 as L3VPN termination point for ATOMs

Configuring AP250 as L3VPN termination point for ATOMs

Go to solution
AnonymousM
Valued Contributor II

‎08-15-2018 05:10 AM

I'm trying to configure an AP250 as a HQ location which will server as the local AP as well as the VPN termination point for various AP30 ATOMs for telework employees. I have configured the ATOMs to use client mode/client access allowing the teleworkers the ability to piggy back off of any wireless network.

The issue is that when the ATOMs are configured for client mode, the AP serves up it's own DHCP and therefore using a typical L2VPN on the AP250 will not work.

 

Has anyone ever set up an AP250 (or similar) to be a L3VPN termination point?

0 Kudos
1 ACCEPTED SOLUTION

Go to solution
samantha_lynn
Esteemed Contributor III

‎08-29-2018 02:04 PM

Just in case anyone else runs in to this issue, I've found out the ATOM APs will set themselves up as DHCP servers if they are in client mode, just something to check if this comes up again.

View solution in original post

0 Kudos
10 REPLIES 10

Go to solution
AnonymousM
Valued Contributor II

‎08-16-2018 06:13 PM

Thank you.

0 Kudos

Go to solution
samantha_lynn
Esteemed Contributor III

‎08-16-2018 05:26 PM

I'm sorry for the delay on this, we are attempting to replicate this in our lab so we can give you a better idea of what's going on. I'll update you as soon as I know more.

0 Kudos

Go to solution
AnonymousM
Valued Contributor II

‎08-16-2018 03:19 AM

9e2fc225e00d46639c46faf599a6383c_0690c000006F6UPAA0.png

0 Kudos

Go to solution
AnonymousM
Valued Contributor II

‎08-16-2018 03:18 AM

Configure -> Common Objects -> Client Mode Profiles

0 Kudos

Go to solution
AnonymousM
Valued Contributor II

‎08-15-2018 04:16 PM

When the ATOM is set to be in client mode it hosts its own DHCP server. The user then logs into the default ATOM website using the default IP (192.168.85.1) and configures which SSID the ATOM should piggy back on. Users are basically double NAT'd behind that then. Does that clear things up?

0 Kudos
GTM-P2G8KFN