"Update devices" button is not active

[a_sokolov]

"Update devices" button is not active

[samantha_lynn · Accepted solution]

Where you see "Network policy" and the drop down says "Select one", you'll need to choose an existing Network Policy before you can update the AP. If you haven't created a network policy yet, you'll want to do that in the Configure tab.

[dsouri]

Hello,

I've seen this to be the case when the device is not associated with a Network Policy.

Click the device's hostname "AH-Switch" -> Device Configuration

You will find a dropdown for Network Policy. Select your policy, then save.

You should now see the Update Devices button active.

Hope this helps, 

David Souri

HiveCommunity Moderator