HiveManager Connect apparently fails to configure an AP130 in client mode

[marco_tarquini]

Hi All.

With reference to the "AP Client Mode" documentation

http://docs.aerohive.com/330000/docs/help/english/ng/Content/reference/understanding-aerohive-ap-client-mode.htm

I took a spare AP130 and tried to configure it following the documentation

http://docs.aerohive.com/330000/docs/help/english/ng/Content/gui/configuration/configuring-aerohive-ap-client-mode.htm

but apparently I failed repetitedly.

I say so because any "assign" option for wireless interfaces is greyed out, BUT if I enable that client mode directly in the wireless interfaces section (on any interface, either wifi0 or wifi1), then the wired interface settings just disappear from the template itself.

So, is it possible to configure an AP in client mode within a Connect account, or do I mandatorily need a Select account to configure a client mode AP? Or this problem exists just between keyboard and chair?

Thanks in advance for your understandings.

[ashley_finch]

Hello,

I'm able to configure Client Mode on a AP130 in our HiveManager, what's the issue in yours exactly?

[benjamin_heravi]

Hello,

We have Aerohive select in our company and still have the same issue.

[ashley_finch]

Hi Marco,

I believe that this is a select only feature unfortunately.

[marco_tarquini]

I also tried to directly onboard the AP, instead than creating a suitable template, but outcome is the very same