05-09-2024 02:12 AM
Hey Everyone,
Tinkering with some AP122X devices at the moment and I noticed that WPA3 is locked behind a firmware update.
I can't track down how to run the update over ExtremeCloud IQ though; I can get into the web interface fine on the AP itself as well, I just can't locate where to download the files from?
Cheers,
Solved! Go to Solution.
05-13-2024 06:18 AM - edited 05-14-2024 05:15 AM
Hello @Nerdlancer,
Is this AP onboarded into XIQ?
If so, Go to manage > Devices > Select AP > Update Devices > Upgrade IQ Engine and Extreme Network Switch Images > Perform upgrade.
For manually upgrading it you can follow these instructions: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000114440
The firmware is not posted on the site since these are not intended to be standalone APs and must be upgraded through XIQ. On rare occasions you may need to upgrade manually and in this case please open a case so that we may be able to provide you with the firmware version you need.
BR,
05-14-2024 03:39 AM
I'm going blind in my old age!
Thanks Cristoph, it's all updating now! 🙂
05-13-2024 06:18 AM - edited 05-14-2024 05:15 AM
Hello @Nerdlancer,
Is this AP onboarded into XIQ?
If so, Go to manage > Devices > Select AP > Update Devices > Upgrade IQ Engine and Extreme Network Switch Images > Perform upgrade.
For manually upgrading it you can follow these instructions: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000114440
The firmware is not posted on the site since these are not intended to be standalone APs and must be upgraded through XIQ. On rare occasions you may need to upgrade manually and in this case please open a case so that we may be able to provide you with the firmware version you need.
BR,