This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

I have 2AP150w that won't boot past amber light.

I have 2AP150w that won't boot past amber light.

Go to solution
lthomas
New Contributor

‎08-20-2018 06:56 PM

I have 2AP150w that won't boot past amber light.
0 Kudos
1 ACCEPTED SOLUTION

Go to solution
samantha_lynn
Esteemed Contributor III

‎08-20-2018 08:05 PM

The fact that you can't run any commands on the AP kind of limits any tips I could give you to start looking in to this. That also speaks to a deeper issue that might need an RMA, but before that we would need to open an ATAC case and troubleshoot with you.

View solution in original post

0 Kudos
6 REPLIES 6

Go to solution
samantha_lynn
Esteemed Contributor III

‎08-20-2018 07:43 PM

That sounds like you're going to need some troubleshooting, are you able to open a case with ATAC?

0 Kudos

Go to solution
lthomas
New Contributor

‎08-20-2018 06:57 PM

 I have 2AP150w that won't boot past amber light. I have tried with and without network connection. right now I am just running them off a POE injector taking possible network issues out of the equation. connected via serial/usb at 9600 Baud and they get as far as displaying

register snif device on interface eth0.

register snif device on interface eth1.

register snif device on interface eth2.

register snif device on interface eth3.

 

 

These are brand new and were up and running on our network for about a week or less and then they just started disconnecting. I have 2 in total. I can serial into them but communication is very slow and I can't run any commands. the reset buttons do nothing when held down for 5-10 seconds with a paperclip. Are they dead?? They booted on install and allowed me to rename and push configs. then a day or 2 later they just went offline

0 Kudos
GTM-P2G8KFN