04-20-2018 05:09 PM
I am trying to block certain built-in Applications via IP Firewall Policy, but when I try to update the APs with the modified configuration, I receive an "Unknown error".
For example, one Application I'm trying to block is XVPN. I can add it to an IP Firewall Policy without issue, but then when I try to update an AP350 with that modified policy, I get this error: The CLI 'service L7-XVPN app-id 1861' execute failed, cause by: Unknown error.
Is it the case that some Application signatures are not supported on some APs or HiveOS versions? If so, is that information documented somewhere?
Solved! Go to Solution.
05-23-2018 06:55 PM
Hi @Jason Wade ,
Could you SSH into the AP and run the command that was failing?
service L7-XVPN app-id 1861
Occasionally CLI failures are due to specific commands or in some case due to firewall restrictions.
Can you confirm the firewall is allowing Hivemanager Traffic?
First, go to About Hivemanager
Then Firewall Guidelines
If Firewall/Content filter isn't the issue, could you open a case so we could assist directly?
Let me know what works best,
David Souri
HiveCommunity Moderator
05-30-2018 12:37 PM
Sorry for taking a while to reply, busy end of school year here.
I ssh'd into it and the command gives this error:
Invalid app-id 1861 encountered!
ERROR: Invalid parameter(s)
It does the same on the previous Golden of 6.5r8b and the new Golden 6.5r9a
So it looks like some APs don't support all of the app signatures that are available in NG which is fine, but it would be great if it failed in a way that still allowed the config portions that are supported to load and gave a more detailed error in the HM.
05-23-2018 06:55 PM
Hi @Jason Wade ,
Could you SSH into the AP and run the command that was failing?
service L7-XVPN app-id 1861
Occasionally CLI failures are due to specific commands or in some case due to firewall restrictions.
Can you confirm the firewall is allowing Hivemanager Traffic?
First, go to About Hivemanager
Then Firewall Guidelines
If Firewall/Content filter isn't the issue, could you open a case so we could assist directly?
Let me know what works best,
David Souri
HiveCommunity Moderator
04-27-2018 11:57 AM
Yep. That's the version we are running. We run the golden on all of our APs.
04-27-2018 11:56 AM
Hi Jason,
This may be the case, but could you advise which HiveOS the AP350 is currently running?
As of this message, HiveOS 6.5r8b is the Golden Release for the AP350.
Please find that detail and more at:
https://docs.aerohive.com/330000/docs/help/english/ng/Content/learning-whats-new.htm
-Thank you