Data Center (SLX) - Page 16 - Extreme Networks

Data Center (SLX)

Questions and discussions about SLX

Forum Posts

Sorted by:

Start a conversation

SLX9640 LAG Config

Hi, I am currently trying to setup a LAG on our SLX9640's but struggling a little. My config for my brocade is below: lag "Netflix" dynamic id 1 ports ethernet 2/4 primary-port 2/4 lacp-timeout short deploy port-name "NetFlix PI" ethernet 2/4...

Renumbering a VCS Logical Chassis Cluster

I have an 8-switch VCS cluster (6740x2, 6710x6, NOS 4.1, Logical Chassis, no vcs virtual ip set) which needs renumbering onto a new management network (resulting from merger and reorganization). What are the implications for doing this while the dev...

Resolved! Where to find the latest Extreme Network OS Target Path Selection Guide?

Hello, Please point me to the latest version this important guide. My latest guide (53-1003915-07) is from August 28, 2018. Thank you! Bernd

MR Management Module Sync to standby Card

I have in the past and wanted to confirm if have running MR card in primary slot and install new card in secondary slot it will sync image and configuration.. i believe done this in the past. Second part any issues with primary running slot a MR and ...

SLX MCT with RSTP

2-SLXs running R-Code with MCT and RSTP between them. Both SLXs are set for Root Bridge Priority 0. One of the SLXs is the Root of the bridge and the other SLX shows Rootport towards the Root Bridge which in a typical switch environment I would exp...

Top Kudoed Authors

User

Count

10

1

1

1

1

GTM-P2G8KFN