Data Center (SLX) - Page 17 - Extreme Networks

Data Center (SLX)

Questions and discussions about SLX

Forum Posts

Sorted by:

Start a conversation

SLX MCT with RSTP

2-SLXs running R-Code with MCT and RSTP between them. Both SLXs are set for Root Bridge Priority 0. One of the SLXs is the Root of the bridge and the other SLX shows Rootport towards the Root Bridge which in a typical switch environment I would exp...

Unable to get SNMPv3 working with ExtremeManagement

Hi, Created the configuration below for SNMPv3: code:snmp-server group NetAdmin v3 notify Allsnmp-server user NetSight groupname NetAdmin auth sha auth-password xxxxxxxxxxx priv AES128 priv-password xxxxxxxxxxxxxsnmp-server v3host x.x.x.x NetSight ...

Can the Default VLAN 1 be deleted or disabled - VCS Logical Chasis

Hi, Would like to remove or delete the default VLAN 1 as its not being used, but can't find the command to do it if in fact it is possible, see below: code:Col-xxx-VSP-Sw11(config-Port-channel-66)# do show vlan briefTotal Number of VLANs configured...

Can't Reach Interface After Changing VRF

Hi, There is probably a very simple answer to this question, but can't think what it is? Very high level I have the following configuration: code:interface vlan 1999description "Server Switch Management"exitconfig trbridge 11interface ve 1999ip ad...

NOS - selection of port range - possible?

hi everyone, Other vendors, Dell I use, give you an option to commands where a selection of ports can be made, specified and then you can operate/configure all those ports in the range. Is it possible with NOS? many thanks, P.

Top Kudoed Authors

User

Count

10

1

1

1

1

GTM-P2G8KFN