SLX 9540 (Brocade) switch SPAN/Mirror configuration

[jsmith2019]

Hi,

Brocade (now extreme) SLX 9540 Switch
SLX-OS Version: 18r.2.00a

Currently I can only configure a SPAN or Mirror for a single interface as shown in the example below, but my question is how would one configure a Mirror for a single source interface and send to multiple destination interface?

SPAN configuration example:

code:

RB1(config)# monitor session 1
RB1(conf-mon-sess-1)# source tengigabitethernet1/0/10 destination tengigabitethernet1/0/15 direction both
RB1# show monitor 1
Session :1
Description :Test SPAN Session
State :Enabled
Source interface : 1/0/10 (Up)
Destination interface : 1/0/15 (Up)
Direction :Both

Any help or direction much appreciated.
Thanks!
-J

[Truyen_Phan · Accepted solution]

Hello,

You can span (mirror) multiple source interfaces to a single destination interface.

It's not supported to span a single source interface to multiple destination interfaces. .