Data Center (VDX)
Questions and discussions about VDX
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Resolved! VDX mac address table question

Hello all, one question about VDX mac address table. VDX switch run at Fabric cluster mode. two spine 8770, and more leaf of 6740 in one fabric cluster. Each 6740 connect to both 8770. The l3 Vlan VRRP-E configured on two spine 8770. In leaf 6740 w...

jeffery by New Contributor
  • 3096 Views
  • 9 replies
  • 0 kudos

Wired 802.1x Authentication Failed on Brocade VDX

Hello, I am trying to implement wired dot1x for machine authentication using certificate. As soon as I enabled dot1x authentication on the port, link protocol goes down with dot1x authentication failed. Machine Here is my setup: 1) Brocade VDX: ...

Tamang by New Contributor
  • 1946 Views
  • 3 replies
  • 0 kudos

Resolved! VDX6740 backup and factory reset

I have 2xVDX 6740 in the same VCS running in logical chassis mode. I want to backup the global configuration and local rbridge configurations, then break the VCS and return the switches back to factory configuration. Then restore the global and local...

Stuman by New Contributor
  • 7162 Views
  • 4 replies
  • 0 kudos

VDX 6740 not working at 10G

Hello I have a VDX 6740 switch. All the 48 copper ports cannot negotiate to 10Gbit Slot Name Primary/Secondary Versions Status --------------------------------------------------------------------------- SW/0 NOS 6.0.2...

rick73 by New Contributor
  • 3444 Views
  • 8 replies
  • 0 kudos
GTM-P2G8KFN