Data Center (VDX) - Page 35 - Extreme Networks

Data Center (VDX)

Questions and discussions about VDX

Forum Posts

Sorted by:

Start a conversation

VDX 6740 - How to control L3 traffic flow between vlans - with ACLs?

hi guys if I need to allow only certain nodes to access vlans behind VE iface do I do it with ACLs? I think of that VE on VlanZ as a gateway to those nodes, through which the nodes would get to other Vlans. Would I need to construct ACLs with all ...

Resolved! NOS, VDX-6740 - mgmt interface unable to ping back.

hi everyone, I might have somewhat not straightforward setup: VDX's mgmt iface is hooked into a non-extreme switch, whose ports are in access more, not-tagged. Then, nodes/clients ifaces are vlans and are hooked into the same switches, on ports wh...

VDX-6740 An ACL is already configured on this interface or interface hierarchy.

hi guys, I'm trying to apply an ACL to a port channel iface and I see: (nos 7.3.0aa) An ACL is already configured on this interface or interface hierarchy. I check: brc_bot(config-Port-channel-47)# do show access-list int po 47 in %Error: ACL not...

NOS VDX-6740 - PBR construct - how to?

hi there, I cannot quite suss out the logic behind ACLs + PBR and am asking here hoping that someone can help. I have an ACL: ip access-list extended protect-VLANs seq 10 permit ip host 192.168.2.144 any seq 50 deny ip any 10.5.8.0 255.255.255.0 ...

Resolved! SCP upgrade from VDX

I'm having trouble figuring out how to upgrade my VDX 6940-36Q switch with Network OS 6.0.0 to version 7.0.2 over SCP. I am currently connected to the switch by serial, management port & an in-band connection. Can someone refer me some king of firmwa...

Top Kudoed Authors

User

Count

18

7

3

2

2

GTM-P2G8KFN