cancel
Showing results for 
Search instead for 
Did you mean: 

Ridgeline Topology is not updating...

Ridgeline Topology is not updating...

Thavamani_Shanm
New Contributor III
Sir,
We are using Ridgeline 3.1 SP3 NMS for our Network Management. Please check the following image for existing topology.

d800d9e63ba545448cf15cfbab3ef186_RackMultipart20161214-53621-147mvva-Original-Topology_inline.jpg



Few days back, one of the EAPS link fiber was disconnected. But, Now We have established in the connection after splicing the fiber cable. So, after fiber splicing the EAPS link between activated in the switch but it is not updated in the topology map. Please check the below image.

d800d9e63ba545448cf15cfbab3ef186_RackMultipart20161214-7303-47dj2x-latest_inline.jpg



Let us know, is there any steps to update the topology map. If any steps are available please share. Thanks in advance.
1 REPLY 1

EtherMAN
Contributor III
Doing this from memory as 3.1 is very old... If I recall you right mouse the map and there is an update links for switch or complete map.. this will refresh the links and should re-draw the maps. You may also have to re-sync the two switches to get the link to show back up...That version of Ridgeline was bad about not re-syncing after changes
GTM-P2G8KFN