Hello,
We are having a VLAN with the IP Range 10.1.2.x/24. We need to block the intercommunication of hosts in this subnet.
The hosts in the subnet can only reach the Gateway 10.1.2.1 only.
Please share the provisions to enable this.
Hello, We have around 40 numbers of x440-24P EXOS based Switches in our campus. Some of the users connected in these Switches using different open source softwares to block the network or limit the bandwidth of others who are connected in the same ...
How to add Device Availablity Summary Report in Netsight Scheduler. Reporting option in scheduler is not listing this Device Availablity Summary Report.
Please share the steps to configure this.
Hello,
Few of the students in our lab using PsiPhon Software to access the blocked sites.
Is there any possibility to block this PsiPhon application in EXOS? If possible please share the procedure.
We are using x430, x440-G2, x450-G2 switches in ...
We are having two ISP in our campus. Both the links are mounted in our core switch X8. We have created two separate vlan for these two ISP namely ISP1 & ISP2. We accessing Internet through our Sonicwall. Most of our Servers are accessed through our ...
Sir,
Thanks for the information.
We need to add a Vlan1(Which is already on virtual-router vr-NKN_ISP) as tagged in uplink ports of our edge switches. Our existing uplink ports are already belongs to virtual router VR-Default. While we try to execut...
Sir,
Thanks for the information. We found the source port using arp. After disabling the port there is no IGMP v1 query logs. Thanks. We need to know few things...
1. Is IGMP v1 query cause Packet drop?
2. Source port is not listed while entering "s...
Sir,
We are trying to detect number of mDNS packets received by the switch. In our x440 Model switches, we ran the "debug packet capture on" and "debug packet capture off" to capture packets. After that , We will filter the mDNS packets from the cap...
