cancel
Showing results for 
Search instead for 
Did you mean: 

XCC in HA radius MGMT

XCC in HA radius MGMT

Giuseppe_Montan
Contributor

Good Morning,

I have 2 XCC in HA.

On a first I connect with radius account but it is not possible do the same with the 1st.

It seems that I can configure only one NAS-ID for the same radius.

Thanks

Giuseppe

1 ACCEPTED SOLUTION

Giuseppe_Montan
Contributor

Hi Stefan, sorry for delay, I am at home due the Covid :-(.

On NPS the customer configured the 2 XCC ip addresses.

On authentication tab I can configure only one NAS-ID for every radius Server ( If the radius is the same ) but now I can connect to the 2 XCC with radius Login.

Thanks

Giuseppe

View solution in original post

8 REPLIES 8

Giuseppe_Montan
Contributor

Hi Stefan, sorry for delay, I am at home due the Covid :-(.

On NPS the customer configured the 2 XCC ip addresses.

On authentication tab I can configure only one NAS-ID for every radius Server ( If the radius is the same ) but now I can connect to the 2 XCC with radius Login.

Thanks

Giuseppe

Stefan_K_
Valued Contributor

@Giuseppe Montanarella 

Hi Giuseppe,

were you able to fix this problem? If yes, can you let us know how?

Giuseppe_Montan
Contributor

Thanks, but If I change on 2nd XCC I change for the 1st too, and it does not work.

I will open a case

Thanks

Giuseppe

Miguel-Angel_RO
Valued Contributor II

Giuseppe,

On the second screen I would put the radius as first authentication method.

Mig

GTM-P2G8KFN