Good Morning, a Customer ask if is possible to use XMC Policy Manager without NAC and radius. At the moment is necessary check the OUI and put on a correct VLAN. I configured X440 in CLI and it works, now we want to do the same with XMC. Thanks Giu...
Hello community, i want to see older syslog messages of a X450-G2 switch but on the webinterface of the Netsight i can only see the last 24h. I’ve read, that the older files are zipped and stored within the Netsight. Is there a possibility to see ...
Hi, To keep it as simple as I can……. Have a scenario where the NAC Eth1 and EWC ESA1 both exist in the DMZ. The solution requires a captive portal that I am intending on presenting via NAC with ‘Authorised Registration’ that uses proxy RADIUS to auth...
Hi, In process of mirroring another NAC solution and come across additional ‘Key Wrap’ configuration in the RADIUS configuration as per below: Is there an equivalent in Extreme, and if so, where is it configured? Many thanks in advance.
Hi,Must have some configuration issue here but can’t see it.Basically have Cisco ASA configured in NAC as per below.. Had the Switch type set to ‘Layer 2 Out-Of-Band’ but also ‘VPN’ as per below.The ASA is authenticating VPN access requests via the N...
