Hello, I've wrote very simple script to rewrite IP address from vlan to management. It works as intended if executed from switch: /code enable cli scripting disable clipaging set var cli.out 0 sh vlan mana | i 172 set var ss $TCL(split ${cli.out} "\...
Currently the Ports report in Device view only shows a PVID of 1 and no neighbor or VLAN info for a cisco environment. I've already modified the device view to include the Port Vlans and Vlans in separate tabs but it would be nicer to see this info...
I am working on a TCL script that would role through ports on a Cisco chassis and check the vlan regardless of how many blades it had in it. My issue is that if my script gets an error when i do a "show interface " command the script ends. I want...
Howdy folks! Working on getting Network Auth nailed down on our network. Running EMC/Control 8.1.4.40 with X450G2s running 22.4.1.4-patch1-2 802.1x auth is working and it is prompting (sometimes) on the Mac computers. It's working perfectly on the ...
On Check Point VSX, the snmpv3 context is used to decide which virtual firewall you are actually polling. On other monitoring systems you define the context in the snmp credentials. So four each virtual firewall you use a different credential. I cann...
