I am working on a TCL script that would role through ports on a Cisco chassis and check the vlan regardless of how many blades it had in it. My issue is that if my script gets an error when i do a "show interface " command the script ends. I want...
Howdy folks! Working on getting Network Auth nailed down on our network. Running EMC/Control 8.1.4.40 with X450G2s running 22.4.1.4-patch1-2 802.1x auth is working and it is prompting (sometimes) on the Mac computers. It's working perfectly on the ...
On Check Point VSX, the snmpv3 context is used to decide which virtual firewall you are actually polling. On other monitoring systems you define the context in the snmp credentials. So four each virtual firewall you use a different credential. I cann...
Hi, In the process of trying to add a switch via ZTP+ and tried every permutation I can think of to get the switch to pass, but no matter what I do or how simple I set it I always get a 'Device Configuration Failed' At the moment I've pretty much d...
I want to copy a map in the NMS from place a to place b to make a better vioew for me. Can i do ths or most i creat a new map in the NMS.
