SHOW IP PORT
I do not view all ip connected to all of 48 ports of my switch (series B5 and seris X450) . I 'll accept to use "extreme management server" also CLI command or device terminal
I do not view all ip connected to all of 48 ports of my switch (series B5 and seris X450) . I 'll accept to use "extreme management server" also CLI command or device terminal
Hi All, Is there anyway this can be done, ideally without having to use a filter everytime I browse to the end systems tab in EMC? I would like to know how Extreme Control even sees the wireless devices when the controllers arent configured to do m...
Hopefully this is an easy one..... Is there anyway to force the use of HTTPS directly via the NetSight application. As an example when I delete port 8080 from the 'Web Server' options it forces me to put a port number in, or a simple radio button so...
Hi All, Can anyone advise on how I would change the info in the attachment to display the switch name rather than the IP please? Same goes for the Access control engine too. Kind Regards Ian
Currently i do some lab test to get in contact with the new Netsight V8. Now SSH is directly useable within OneView (Web Browser). It works nice and very fast. But i am looking for way to grep all the output (during the whole session) as i do in ...
User | Count |
---|---|
73 | |
72 | |
38 | |
17 | |
16 |