Hello, I'm working with NAC and so netlogin. We have a need to have a switch plugged on another one without having to disable the netlogin but it looks like it's impossible. We tried numerous setup, and the only one that is working, is to make th...
Is there a way to discover the Access-Points and display the right connection to the Switchport in the Netsight Topology map automatically? It is nice to see the Access-Points as the port of the controller, but it would be nicer to see the physical c...
We have one specific link that USED to be connected to two switches, SWaa and SWab, port 1:2 on both sides. The link was detected in NetSight via LLDP and EDP and showed up just fine on the OneView map. Then a new link was established between the swi...
I have the following problem: 1. Set the SNMPv3 on Extreme switches with siguinetre configuration: snmpv3 add configure user authentication md5 NetSight F4l4b3114c01 privacy F4l4b3114c01netsight_btcol configure SNMPv3 user group add NetSight sec-mod...
