CLI XOS to configure the default snmp access for Netsight I would like to add new switches ( X460, X440 ...) with XOS 16.X from the Netsight Console. But it's not so easy to do compare from the legacy Riegeline with snmpv3 ! What are the procedure to...
I made a change in the configuration of SNMPv3 credentials NetSight but I have doubts about this message? Affection services on switches or only in the management of SNMP on NetSight? I appreciate your recommendations
As I change the default route NetSight and save the changes? Thanks for the help!!
I need to catch all the port assigned to a particolar vlan on the entire network. We need to create a Group of Port based on the port configured as untag on this vlan. The Switch are all XOS, and the port may change vlan direct from the customer, so ...
Hello, I've been using the purview collector / physical appliance to collect test data with the mirror. I changed the settings of the mirror and want to completely remove all data that was collected before, because it's useless. Is there way to do ...
