Hi there, I noticed this issue first in Version 6.3.0.174 with a Bonded S4-Chassis. The full length "show support" should have about 70.000 lines, but the implemented "Execute Show Support Script" in Inventory Manager stops @ about 8.272 lines with...
I run a Custom Report about "Device % Availability" from Last Week, and it shows total availability. But when I run Custom Report about "Device % CPU Load" , the graphics shows not fully completed. What could be happening?, I´m attaching some image...
The problem I am having is that we are receiving Device Up alarms on devices which have not produced any Device Down alarms?? The traps Poll interval is 15 seconds, the timeout is 30 seconds and the option to "Send Down Event on timeout ONLY" is sel...
We are having Netsight v6.3 and monitors enterasys A-Series switches. In alarm manager, we configured custom alarm criteria for loss of redundant power failure. We created one batch file which will be executed as action whenever the trap occurs. Thi...
Hi, i wanna setup NAC Zones, locations/switches being the selector. Got about 20 locations to reflect in Zones, and about 20 for dieferent endsystem classifications across all locations. Because the Zones are applied by NAC rules only, this would r...
