ExtremeCloud IQ- Site Engine Management Center - Page 380 - Extreme Networks

ExtremeCloud IQ- Site Engine Management Center

Questions and discussions about ExtremeCloud IQ-Site Engine Management Center

Forum Posts

Sorted by:

Start a conversation

SNMP-Read Problems - bad community name, since XOS-15.5.3.4 BD8810. BDX8

Since I updated our BD8810 from XOS Version 15.3.4.6-patch1-8.xos to 15.5.3.4-patch1-6.xos I get problems to access the switch through snmp from Netsight 6.1 or Ridgeline 3.1. In the syslog of the BD8810 I got a lot of "MSM-A: Login failed through ...

Laptops unable to connect to wireless

Our school district's Windows 7 laptops are unable to connect to the wireless with the "validate server certificate" setting enabled under the wireless properties. If I uncheck that box the laptop is able to connect. With about 1000 laptops uncheckin...

Netsight 6.2.0 - Topology Manager - No conenctions drawing

Hi, im using netsight 6.2 and tried to create a topology map from my discovered devices. The Devices from my group are shown, but the topology doesnt show any connection betwenn the devices. in other words it doesnt draw the lines between them....ev...

Netsight v6.2 & 3rd Party Device Informations

Hi Guys, we installed Netsight Version 6.2 on Wednesday and all is fine except one thing: We import the MiB of a Zyxel Switch (GS1920-24HP) and edit the mydevice.properties File so the question Mark is away but Netsight doesn't show the Firmware Ve...

Problem with APs not showing up in OneView

I have two active APs in my configuration and everything is working fine from a wireless perspective. I'm running Netsight 6.3 and 09.21.01.0179 on my controllers. The APs are local and approved on my primary controller and foreign on the other. The...

Top Kudoed Authors

User

Count

94

92

41

17

17

GTM-P2G8KFN