ExtremeCloud IQ- Site Engine Management Center - Page 399 - Extreme Networks

ExtremeCloud IQ- Site Engine Management Center

Questions and discussions about ExtremeCloud IQ-Site Engine Management Center

Forum Posts

Sorted by:

Start a conversation

NetSight 6.1.171 with Extreme Summit switch X430 firmware 15.6 always snmp timeout?

Our customer use NetSight 6.1.171 with Extreme Summit switch X430 firmware 15.3, and NetSight sometimes shows snmp timeout error. I ask the problem on HUB, and got it will resolve with NetSight 6.2 and XOS 15.4 or later. Since the NetSight 6.2 doe...

Summit400 Configuration Backup NetSight

We still have a few straggling non XOS devices in our network. I'd like to use NetSight to back them up. Inventory Manager throws and error "Cannot perform action with MIB type = UNKNOWN." so I tried changing the firmware and configuration in MIB and...

Mixed legacy Enterasys S/K/N/C and Extreme Syslogging in Netsight

Is there a way to officially configure syslogging for both legacy Enterasys hardware S/K/N/C and Extreme switchs. Currently the Extreme syslogging works if I change the syslog pattern to 'Red Hat Linux Syslog' Enterasys syslogging works if I change...

NetSight acts as a syslog server

Hello all, I´ve configured NetSight to act as a syslog server a few years ago hands on an article in the Enterasys knowledgebase at talismaonline (#10792). I´ve now upgraded NetSight to 6.2 (newly installed and moved the database), but I can´t find ...

Netsight Compass - Full MAC address instead MAC OUI prefix?

Hi, Is there a way when doing a compass search to just display the full MAC address without the MAC OUI prefix. There seems to be an option to do this for OneView, but not Compass? The reason I need this is that I am tasked with creating a Databas...

Top Kudoed Authors

User

Count

94

92

41

17

17

GTM-P2G8KFN