ExtremeCloud IQ- Site Engine Management Center - Page 64 - Extreme Networks

ExtremeCloud IQ- Site Engine Management Center

Questions and discussions about ExtremeCloud IQ-Site Engine Management Center

Forum Posts

Sorted by:

Start a conversation

Resolved! Non-default SNMP User in XMC = headache with Traps... FAD?

Hello, I’ve a bit long story to a short question (tl;dr: GOTO the last paragraph). I’ll share my thoughts below according to the troubleshooting steps I took today, hoping that someone can have a look and make sure it’s FAD and not some tricky intern...

Resolved! Unable to add TxQueue Port Groups to the device

Good afternoon,when I try to apply the policy on X590 ( MLAG configuration ) I receive this error“Unable to add TxQueue Port Groups to the device”I did not find any solutioncan you help me ?ThanksGiuseppe

after upgrade to XMC 8.5.2.6 cannot terminal to devices

After upgrading to XMC 8.5.2.6 we can no longer terminal to the devices - it just says connection failed - even though all devices are showing as up in device list and all the SNMP / CLI profiles have not changed. the old netsight version 8.0.3 is s...

The configuration template does not work by using restore configuration.

HiI am thinking that create a configuration template and mass produce devices with the same settings.Even if I use the configuration template from the restore configuration, but the configuration is not reflected in the switch(VOSS) configuration.Ple...

Resolved! AP3825I How to Configure

Good afternoon, I have an Ap3825I, how can I configure it since I do not have the C35 Console Router, there is a way to configure differently that the console is not necessary.

Top Kudoed Authors

User

Count

77

75

38

17

16

GTM-P2G8KFN