ExtremeCloud IQ- Site Engine Management Center - Page 81 - Extreme Networks

ExtremeCloud IQ- Site Engine Management Center

Questions and discussions about ExtremeCloud IQ-Site Engine Management Center

Forum Posts

Sorted by:

Start a conversation

Policy to deny access to internal networks but allow access externally not working

Working with Exos, S-series router and Policy Manager. Currently working with a customer, and I've setup a policy to deny 10.0.0.0/8 but allow 10.0.0.0/24. Precedence shows this should work. I also have allow DNS, DHCP and ARP. In the past with...

Resolved! EXOS Stack Switches not archiving in XMC 8.5.0.169

We have 8 sets of EXOS stack switches consisting of 2 X460-G2’s each.After upgrading to XMC 8.51 the switches will no longer upgrade automatically or manuallyThe error in the information section of the Inventory log isArchive Save /World/X460-G2: (17...

NAC Automation

HelloI’m on a NAC Project with about 400-500 NAC Rules. To configure all of them manually it’s a real pain. What possibilities of automation are available? Following tasks I’d like to automate:vlan creationCreate NAC RulesCreate NAC Profile and assi...

Resolved! No Device Name or IP Address in Syslog Alarm

I have created a Syslog Alarm that I receive via email, but I’m not receiving any information that tells me which device the alarm came from. I have enabled every keyword. Here is what I currently have configured for the Action Override:$alarmName ...

Resolved! How do i upgrade ers3650 with extreme mangement center

How do i upgrade ers3650 with extreme mangement centersome many ers3650 6.2.015 to 6.4.1.007In EMC > configuration/firmeware/>upgrade firmware > assign image ? format new imageI have 3600_6100_diags.bin and 3600_641007s.imgThanks explain to me ...

Top Kudoed Authors

User

Count

77

75

38

17

16

GTM-P2G8KFN