cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

Can't Select Wireless Upgrade Image From Extreme Management Ver 8.0.2.42

Can't Select Wireless Upgrade Image From Extreme Management Ver 8.0.2.42

Anonymous
Not applicable
Hi,

Possibly something I am doing but have uploaded the firmware to as per the image below:

7f15fc29055f4b1590be4fcb807dda8d_RackMultipart20170804-111476-qw2g7l-Firmware3_inline.png



But when I select the the wireless controller, and go to set an image none will display, even if I tick the box for 'Show All Images' and refresh:

7f15fc29055f4b1590be4fcb807dda8d_RackMultipart20170804-111476-169anl4-Firmware1_inline.png



7f15fc29055f4b1590be4fcb807dda8d_RackMultipart20170804-24440-tt34ze-Firmware2_inline.png



Any ideas?

Many thanks.
2 REPLIES 2

Anonymous
Not applicable
So obvious now you show me... your a genius šŸ™‚

Thanks Ron.

Ronald_Dvorak
Honored Contributor
Hi Martin,

it's working as designed šŸ™‚

You've uploaded the software and left it on the default directory setting which is TFTP with the default directory of /tftpboot/firmware/images/

But the controller is set to SCP with the default directory of /root/firmware/images/

That's the reason you don't see a file in the assign image window.

Delete the file and upload it again but choose SCP.

-Ron

e4919a0fbc2d412eaf63e31ce0b0c835_RackMultipart20170804-62143-1p491mn-EMC_firmware_upload_inline.png



GTM-P2G8KFN