cancel
Showing results for 
Search instead for 
Did you mean: 

Configuración TRAP SNMP through Extreme Management Center

Configuración TRAP SNMP through Extreme Management Center

Kevin_Alexis_Ma
New Contributor

Hi:

Currently I have an XMC in version 8.0.2.42 with EXOS switches of the X460-G2 model the vast majority. I am trying to configure TRAP RECEIVER through XMC but in some it does the configuration:

685cad78b6bf4f369f014a250a148643_8f6d492f-b2ff-4dd9-9b0d-e49f33937cab.png

But now that I have done the installation of new switches with the most recent version of EXOS 30.6 as recommended and some of version 21. This error appears:

685cad78b6bf4f369f014a250a148643_b728e194-6d1e-416e-a6fb-49e13e5cdac3.png

And it is not because the XMC does not have the credentials of the switches, because I have already made a script and entered the terminal. So far I have not found any documentation about it, since I want to activate the traps for sending more advanced alarms of the switches such as ELRP, etc.

Stay tuned to your comments.

 

0 REPLIES 0
GTM-P2G8KFN