EMC Tuning 8.03

[Jairo_Rojas_Her]

As I can have through snmpv3 all the statistics of CPU, memory plus all the data of the statistics of the interfaces that are monitored.

I also need to fine tune all the EMC features for other vendor in this case I require on CISCO.

Thank you for your contribution and collaboration.

[Bharathiraja__S]

Hi Jairo,

Adding to previous comment please check below KB for more details about alarm and syslog.

https://gtacknowledge.extremenetworks.com/articles/How_To/Netsight-How-to-Configure-an-Alarm-to-Trig...

Thanks,
Suresh.B

[Bharathiraja__S]

Hi Jairo,

Could you explain what you have configured and what is not working on other vendor# ?

Thanks,
Suresh.B

[Zdeněk_Pala]

Hi. EMC can receive syslog from any source. EMC can receive snmp traps from any source aswell. And SNMP informs also. Regarding traps and informs if you update MIBs then the OIDs will be translated also. With 8.0.4 events and alarms from Avaya should be “recognized” and incorporated. Z.

[Jairo_Rojas_Her]

Thanks for the data, but how can I receive EMC notifications from TRAPS and SYSLOG?