cancel
Showing results for 
Search instead for 
Did you mean: 

EMC Tuning 8.03

EMC Tuning 8.03

Jairo_Rojas_Her
New Contributor II
As I can have through snmpv3 all the statistics of CPU, memory plus all the data of the statistics of the interfaces that are monitored.

I also need to fine tune all the EMC features for other vendor in this case I require on CISCO.

Thank you for your contribution and collaboration.
7 REPLIES 7

Bharathiraja__S
Extreme Employee
Hi Jairo,

Adding to previous comment please check below KB for more details about alarm and syslog.

https://gtacknowledge.extremenetworks.com/articles/How_To/Netsight-How-to-Configure-an-Alarm-to-Trig...

Thanks,
Suresh.B

Bharathiraja__S
Extreme Employee
Hi Jairo,

Could you explain what you have configured and what is not working on other vendor# ?

Thanks,
Suresh.B

Hi. EMC can receive syslog from any source. EMC can receive snmp traps from any source aswell. And SNMP informs also. Regarding traps and informs if you update MIBs then the OIDs will be translated also. With 8.0.4 events and alarms from Avaya should be “recognized” and incorporated. Z.
Regards Zdeněk Pala


Thanks for the data, but how can I receive EMC notifications from TRAPS and SYSLOG?
GTM-P2G8KFN