Fabric Attach I-SID with Policy

[ChristianK]

Hello all,

I have a running setup with Policy Manager and Fabric Attach on Switch Engine.

I want to use a new Policy with a new VLAN. This is working fine.
With Policy Manager I can push both to the switches.

We have Fabric Attach on the Switch, for the VLAN the I-SID information is also needed.

Is there a way to push the I-SID also with the Policy Manager?
For the VLAN I use the Option "Always write VLAN to device(s)"

Thanks and best regards,

Christian

[ChristianK]

I used the I-SID in the policy response. This worked.

In our environment, we don't use Sites. Could not test the article.

[Zdeněk_Pala]

you can define the VLAN to Service mapping on the Site level.

[James_A · Accepted solution]

You can send the I-SID in the policy response https://extreme-networks.my.site.com/ExtrArticleDetail?an=000080175