How Configuring Events and Traps in Switches Extreme XOS

[Jairo_Rojas_Her]

I need to configure events in the logs of the switch and also that these are replicated to NetSight as I set these alerts on Switch Extreme and that can be displayed in NetSight?

[Jairo_Rojas_Her]

[Tony_Thornton]

There may be some misunderstanding. At this point since adding the switch as a trap receiver did not work, I am looking to confirm the SNMP settings, which is done in Console > Tools > Authorization / Device Access, not the trap receiver settings as shown in your latest screenshot.

[Jairo_Rojas_Her]

Shared the configuration!!

[Tony_Thornton]

It looks like the engine id matches. Does the SNMP community and user information configured on the switch match the SNMP Device Access Profile used in NetSight?

Go to Console > Tools > Authorization/Device Access > click on Profiles/Credentials tab

Do the Access Profile credentials (Read / Write) in NetSight you are using to communicate with the switch match the SNMP credentials configured on the switch? You can double click on a profile to view or edit the read / write credentials including passwords.