Individual Interface Alarms in XMC

[Extreme-LoCo]

Is it possible to configure, or does anyone have any alert templates for, individual interface alarms(Up/Down)? I would like to be able to configured interface up/down alarms for specific ports on switches (Uplinks and APs) but not get an alarm each time a user port goes Up/Down on the same switch.

[Ronald_Dvorak]

You'd put ports of different devices in one device group.

E.g. I've 4ports in my group - 3 ports of my switch and 1 from my FW

[Extreme-LoCo]

NVM, I think my answer is self-explanatory. Thank you !

[Extreme-LoCo]

Would the device group, ex. APs, be able to span multiple devices or would each device need its own device group?

[Ronald_Dvorak]

Hi,

you'd create a new device group...

Then add the port to the device group...

And then in the alarm select the Device Group as a Additional Criteria.

In that case you should only get a alarm for a link down if the port is part of this Device Group.

-Ron