This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Need help getting Eaton Flexview to work

Need help getting Eaton Flexview to work

davidj_cogliane
Contributor

‎10-01-2015 06:50 PM

I can't figure out why the UPS reports to the mib tool but not to the Flexview. It seems like it should be either both or neither.

0d6dc5d6b2324b8ea0182c7d60bc5faa_RackMultipart20151001-4006-bbcxtb-Capture_inline.png

0 Kudos
18 REPLIES 18

Murphy__Daniel
Extreme Employee

‎10-02-2015 12:26 PM

Perhaps you could attach the FlexView file that is not behaving as expected? Also provided the firmware / device that are you see responses from using MIB Tools. I cannot tell from the image thanks.
0 Kudos

Murphy__Daniel
Extreme Employee

‎10-02-2015 12:21 PM

Hi Dave, I can't tell what the OIDs you are reading nor the device type/family you are looking at.

Is this a new 3rd party MIB ? i.e. one you added?
note FlexViews send the OIDs in PDU blocks if you are including OIDs in the 'default' group that are not responding at the device it may appear there is no support at all.

Verify each OID you are looking for in the FlexView is being returned by MIB Tools.
Any that are different instances other that (0 - scalars) I would move to the 2 request block using the FlexView editor.
0 Kudos

davidj_cogliane
Contributor

‎10-02-2015 12:03 PM

6.3.0.162
0 Kudos

Bharathiraja__S
Extreme Employee

‎10-01-2015 11:42 PM

Hi David,

What is the netsight version which you are using ?

Thanks,

Suresh.B

0 Kudos
GTM-P2G8KFN