Need help getting Eaton Flexview to work

[davidj_cogliane]

I can't figure out why the UPS reports to the mib tool but not to the Flexview. It seems like it should be either both or neither.

[davidj_cogliane]

Daniel,
Here is the other mib file, I thought I had uploaded both last week, sorry for the mixup on that. https://www.dropbox.com/s/fqw38el3vlqctus/Xups.mib?dl=0
I tried moving the xups values to the 2 block as you suggested and saw no change in the Flexview output.

Here is the HTML output from the mibtool table
https://www.dropbox.com/s/3lmm4txyf3qohqi/Eaton%20MibData.html?dl=0

Thanks

[Murphy__Daniel]

Also when you upload that other MIB perhaps you could export a MIB tools read of the xups tables from MIB tools in HTML

[Murphy__Daniel]

You provided only the pwernet414.mib so I do not have yet the Xups.mib
So if you are seeing things correctly with no issues perhaps it works for you now?
Have you tried moving the xups values to the (2) request block (i.e. not the (default (1)) request block?

Are you sure that the xups values you are reading all share the same instance (ifIndex) as the ifPhysAddress?

[davidj_cogliane]

Daniel,

If I go to properties in the flex view I can search the OID and find it as shown in the below picture

If I open the mib tool I can find it in the tree and it provides data as seen below

So I dont understand how all this can be true if it is not in the database. And it appears in the Mymibs folder

We are trying to get these third party devices working as many of our customers seem interested in the prospect of consolidating some of there network management into one application.

Thanks for the help

[Murphy__Daniel]

1) This MIB seems to be safe - no issues I see on import.
2) However looking at the 'created FlexView you provided. The new OIDs added are not found in the MIB database.
xupsBatTimeRemaing, xupsIdentModel, xupsBatteryLastReplacedDate, xupsBatteryAbmStatus, xupsOutputLoad .... etc.
Note: if you open the FlexView and click on the columns the MIB Tree will select the OID. This shows the current MIB database does not have these entries.
Good Luck.