Netsight. We need to configure traps and syslog in all our devices to see problems and create alarms with AlarmManager.Some Help?

[Rey_Juan_Carlos]

We need to activate traps and syslog in all our devices, but we don't know how. something like fan status, power status, etc...

[prasanth_gunnam]

Even this "disableAuthorization yes" is present in our Netsight console, but still i am not getting traps and syslogs. how to configure the same?

[Rey_Juan_Carlos]

Thanks a lot. This is the line what we need "'disableAuthorization yes'".
Now we have to make new alarms with all this traps.

Thanks for all.

[TylerMarcotte]

Is the SNMP user account added the snmptrapd file? You can select that in the tab to the right of where you push down the Trap settings. If it is already in there you can try adding the line: 'disableAuthorization yes' to the line and restarting the snmptrapd daemon. This should verify if it's just an issue of not processing the traps or if they're not being sent at all.

[Tamera_Rousseau]

We see the screen shots this time! Thanks for retrying. Any thoughts Tyler?