No Application and Network response

[JohanHendrikx]

In the analitycss dashboard there is no info about networks and application response.

I have checked the config on the switches:

ACL: ok

configure access-list telemetry any ingress
configure access-list telemetryegress any egress

ETMON: ok

configure sflow sample-rate 1024
configure sflow poll-interval 60
enable sflow
configure sflow collector 10.2.x.y port 6343 vr "VR-Default"
configure sflow agent ipaddress 10.2.x.z
configure sflow ports 1 sample-rate 1024
enable sflow ports 1 ingress

Mirror EAN ok

create mirror "EAN"
configure mirror EAN to remote-ip 10.2.x.y from 10.2.x.z ping-check off
enable mirror EAN

What can be wrong?

[JohanHendrikx]

All setting checked.

I've configured a new appliance and have now network response. Applicantion still no data.

Any idea?

[Ryan_Yacobucci]

Have you configured the endpoint locations to include your local networks?

[JohanHendrikx]

** Extreme Analytics Version 23.4.12.3 **
process status restarts pid start time
appid started 0 7641 Fri Jul 21 11:53:05 2023
appidserver started 0 7699 Fri Jul 21 11:53:05 2023

To my knowledge the interfaces are in the correct mode.  One interface for management en monitoring.

[Zdeněk_Pala]

if you see values in the flow tab then the underlying infrastructure should be fine (ports, switches).

check the Analytics > Configuration > Configuration > Dynamic Thresholding