cancel
Showing results for 
Search instead for 
Did you mean: 

Oneview Alarm

Oneview Alarm

Husam
New Contributor II
Hi all,

Conosle shows the sysname of alarm source but oneview does not!

Is there anyway to let the oneview show the sysname of alarm source instead of its IP address?

Thanks
Husam

5 REPLIES 5

Husam
New Contributor II
Thank you for your answer.

I did mentioned configuration, but it works out for console only. For oneview it is still same problem. All alarms are showed IP address in source not sysname.

Is there any more thing could be done?

regards
Husam
GTM-P2G8KFN