OneView cannot access Purview server, error states "appliance is not running"

[Steve_Ballantyn]

I have a wireless controller with esa0 set up as lag1, and esa1 set up as a mirror. My esa1 connects directly to a NIC on my VMWare server (promisc' set to permitted), and this NIC is connected directly to esa1 on my controller. A simple setup, I think.

When I go into OneView, add my EWC as a Wireless Control Flow source, and then try to Enforce those settings, I get "1 appliance is not running".

Anyone have any clues for me?

Here are some screenshots of my setup ...

My EWC ...

My Purview appliance ...

My OneView settings ...

[Ronald_Dvorak]

Could you also post an screenshot of OneView > Applications > Configuration > Overview

I'd like to see whether the Engine is "green" and enforced.
I run exact the same setup and I don't see any configuration differences.

[Jeremy_Gibbs]

Ahh, glad it was a simple fix! No problem.

[Steve_Ballantyn]

Okay, I got it going. I just needed to go in and delete the purview appliance, and then added it right back in again. This time it came up with the correct version number and I was able to enforce without any issues.

Thanks for the help gentlemen!

[Jeremy_Gibbs]

Ohh, didn't see you said it was successful... Are you still seeing 6.1 under configuration overview?