cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

Policy to allow only internet access

Policy to allow only internet access

Matthew_Perry
New Contributor III
I'm trying to setup a Internet only Policy for wired ports. I've created permit role and added deny destination rules for our local networks. I've also added allow rules for dns, dhcp, etc. It looks like rule precedence is tripping me up as the denys are before the permits so everthing is blocked locally. Is there a way to make rules have different precedence or a diffrent way to do this.

1d7fb2bb53fd4e88a21a3baf384aed4f_RackMultipart20170911-102927-2q7j6x-snip_20170911135632_inline.png


6 REPLIES 6

Mike_Thomas
Extreme Employee
So the Securestacks do not allow re-ordering of the policy. So there is no top->down execution of rules. There is a precedence. So the rules that are most complex (like your top rules with /24 bit masks, should hit first, and then your simplest ones (like ARP ethertype) should be hit last.

I think another approach to it is to look at the Unregistered Rule set that is part of the default policy domain. It effectively allows minimal traffic to talk to a NAC and get an IP address and do DNS, but no IP traffic (because the default policy is to Deny traffic). It may be a good model to work from.

Jeremy_Gibbs
Contributor
You could always start with a deny all rule and permit only what you need.

I guess I could do a deny all and then permit all public IP networks. That gets to be a crazy long list of permit rules as I would need to allow the following. Anyone know what the max number of rules are on the b-series?

1.0.0.0/8
2.0.0.0/7
4.0.0.0/6
8.0.0.0/7
11.0.0.0/8
12.0.0.0/6
16.0.0.0/4
32.0.0.0/3
64.0.0.0/2
139.0.0.0/8
140.0.0.0/6
144.0.0.0/4
160.0.0.0/5
168.0.0.0/6
172.0.0.0/12
172.32.0.0/11
172.64.0.0/10
172.128.0.0/9
173.0.0.0/8
174.0.0.0/7
176.0.0.0/4
192.0.0.0/9
192.128.0.0/11
192.160.0.0/13
192.169.0.0/16
192.170.0.0/15
192.172.0.0/14
192.176.0.0/12
192.192.0.0/10
193.0.0.0/8
194.0.0.0/7
196.0.0.0/6
200.0.0.0/6
204.0.0.0/8
205.0.0.0/9
205.128.0.0/11
205.160.0.0/13
205.168.0.0/14
205.172.0.0/20
205.172.16.0/22
205.172.24.0/21
205.172.32.0/19
205.172.64.0/18
205.172.128.0/17
205.173.0.0/17
205.173.128.0/20
205.173.144.0/21
205.173.160.0/19
205.173.192.0/18
205.174.0.0/15
205.176.0.0/12
205.192.0.0/10
206.0.0.0/7
208.0.0.0/4

Ya I was trying to think of a good way to do it in the opposite direction but couldn't figure out how that would look.
GTM-P2G8KFN