cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

suppress specific traps on Netsight server

suppress specific traps on Netsight server

M_Nees
Contributor III
we have in our network nearly 500 Switches. Unfortunately EXOS sending to every netlogin process (login and logout) an trap. To disable this on the switch is currently (16.1.x) not possible. So the trap log is overloaded and the really important traps are out of sight.

I am looking now for a way to suppress or discard this specific traps (oid) on the netsight trap daemon.

Is there a way ? if yes how ?
8 REPLIES 8

Erik_Auerswald
Contributor II
The relevant configuration command for EOS seems to be
set multiauth trap (not actually tested, but this could be a starting point for further investigation).

Hi Erik,

thanks for your advice - great.

This CLI Command is avaiable on both - SecureStack and S-Series!

Tony_Thornton
Extreme Employee
Unfortunately, I don't know about how to do that with EOS devices. Maybe another forum user has insight into doing that for EOS.

M_Nees
Contributor III
it seems there is no way to do that on netsight trap daemon ;-((

With EXOS switches the exclude filter is one alternative - in which i have to reconfigure 500 switches ...

But what is a possibility for EOS Switches ?

i think that 's call for a new feature at netsight trap daemon.
GTM-P2G8KFN