cancel
Showing results for 
Search instead for 
Did you mean: 

About AP uplink interface in Extremecloud IQ pilot

About AP uplink interface in Extremecloud IQ pilot

Lala123
New Contributor

Hello,

 

I’m configure the nework policy on the Extremecloud. We will confiure two SSIDs maping to differenet VLAN. My question is that what is the AP’s management VLAN?  What is the default native VLAN for the AP230?

 

Thanks.

1 ACCEPTED SOLUTION

StephanH
Valued Contributor III

Hello Liza,

if you onboard a new AP the AP will send the traffic untagged to the switch. So it doesn't matter which vlan is on the port to the AP it just has to be untagged.

The native vlan must match the native vlan on your switch but you do not need to use the native vlan and you can change it later if you want.  If you want you can tag all user traffic to different vlans. For the onboarding the native vlan is not necessary.

The management vlan is for CAPWAP, SSH and other management traffic.

 

Regards Stephan

View solution in original post

6 REPLIES 6

StephanH
Valued Contributor III

Hello Lisa,

you can change the native and managment vlan in the Network Policy-><your policy>->Additional Settings.

There is a menu called “Managment&Native VLAN on the left side of the main window.

Regards Stephan

Lala123
New Contributor

I have saw the native vlan is 1.  Where can I change it?

 

Thank you.

GTM-P2G8KFN