AP LLDP Neighbor not shown in XiQ under Manage->Device

[mileagainst]

Hi everyone,

i have an issue that for some APs LLDP informations are not being shown in the overview window "Devices". When i click on that AP and window of that AP opens, over there is shown completely normally.

What can be the reason for this and how to solve it?

Many thanks in advance!

[w1f1n00b]

I've had this issue for quite some time and just accepted it as an Extremeism. Where you able to get to the bottom of it?

Curious if you're using Eth0 and Eth1 to patch in APs?

[mileagainst]

I have seen that topic already, but it is not related to my issue as i dont't use Suplemental CLI

[Wiamsde]

AP510s are not showing any LLDP information in the XIQ Device Monitor window - due to no LLDP information in the AP LLDP neighbor table.

---

@mileagainstCFA Home wrote:

Hi everyone,

i have an issue that for some APs LLDP informations are not being shown in the overview window "Devices". When i click on that AP and window of that AP opens, over there is shown completely normally.

What can be the reason for this and how to solve it?

Many thanks in advance!

---