hello good day, how can I make the connection to the extremecloudiq cloud for an AP WING 305C?
In this case the network does not use vlan 1 or default, vlan 800 is used with all permissions allowed.
I have already configured the AP in centralized mode, placing the command "cset vlanvid 800"
but still does not connect to the cloud.
The AP was changed to standalone mode, and the vlan 800 interface was configured with dhcp, it was configured in port ge1 as an access vlan and we had the same result, in the same way that interface was configured as a trunk type vlan.
How To: How to perform a VLAN probe from CLI on an ExtremeCloud IQ (XIQ) AP? | Extreme Portal
int mgt0 dhcp-probe vlan-range vlan-range : Enter the VLAN list to probe. The range is from 1 to 4094. Use a hyphen (-) to separate the beginning and ending IDs of a range of VLAN IDs; for example, 70-100.
OK so the AP at this time should be in Cloud operational mode but you don't see it connect to the Hive Manager, is this correct?
If this is the case, the first thing to do is ping www.google.com. If successful, it tells us that the IP, DGW and DNS are fine.
Second, ensure all in-line firewalls allow outbound connections to the Extreme Cloud services listed on the Firewall Configuration Guides page: https://extremeportal.force.com/ExtrArticleDetail?an=000079399
3rd, follow this article for advanced CAPWAP troubleshooting: https://extremeportal.force.com/ExtrArticleDetail?an=000057794
Do you want the AP305C to be in WiNG (Distributed), Centralized (Campus) or Cloud operating mode? On the cloud Is the AP adopted by any controller? No Is the AP integrated in XIQ? The serial number has already been registered in the XIQ What operating mode is the AP currently booting into? in centralized mode