cancel
Showing results for 
Search instead for 
Did you mean: 

how to enable Dynamic Airtime Scheduling?

how to enable Dynamic Airtime Scheduling?

zlinuxboy
Contributor

I read 《Aerohive Design & Configuration Guide High-Density Wi-Fi》, it refer Dynamic Airtime Scheduling setting on

Configuration >
Network Policy › Configure Interfaces & User Access › Additional Settings › QoS Settings.

But I could not find it on the latest xiq. where is this config option?

By the way, how to find out the xiq‘s version, sometimes the KB article state some feature will mention the xiq version.

1 ACCEPTED SOLUTION

Ash_Finch
Contributor III

The above path is in HiveManager Classic. In XIQ you want to go to:
Network Policy > Additional Settings > QoS overview

XIQ version can be found by hovering over the name/person icon in the top right > about ExtremeCloud IQ and it’ll list the build ID/version.

View solution in original post

3 REPLIES 3

SamPirok
Community Manager Community Manager
Community Manager

I’ll see about getting some articles written to address these questions, thanks for letting us know where the documentation could be improved! 

zlinuxboy
Contributor

@Ash Finch thanks, you save my day. but why there is not related info about this setting on kb or other else. It’s weired.

Ash_Finch
Contributor III

The above path is in HiveManager Classic. In XIQ you want to go to:
Network Policy > Additional Settings > QoS overview

XIQ version can be found by hovering over the name/person icon in the top right > about ExtremeCloud IQ and it’ll list the build ID/version.

GTM-P2G8KFN