Hallo Johan, a VX 9000 can be monitored by using an NSIGHT Profile, which points to you XIQ Instance. Please visit this KB article : How to add WiNG AP to Extreme Cloud IQ. https://extremeportal.force.com/ExtrArticleDetail?an=000079429&q=%20000079429%20
You will need a related Lic on you XIQ Instance, to cover the VX. On XIQ you can also use SSH back into your VX. I would use 7.7.1.1 on the VX, so if possible, please upgrade your Controller.
Does the Wing visibility only on the XIQ works with the IQ Connect Freemium account or still needs the IP Pilot or Navigator ? I was lookin at that video : https://www.youtube.com/watch?v=CMgGiSDlZns&ab_channel=ExtremeNetworks where it says at the beginning the 2 journeys (one with freemium connect account and the other one on Pilot/NAvigator)
WiNG visibility should work in monitor-only mode on Connect level account as well.
When connecting Wing environment to Pilot-level account, you must have at least Navigator license for each Wing device
As per example given by Douglas: nsight-policy XIQ server host va2-wing.extremecloudiq.com https enforce-verification poll-work-queue
Pay attention to suffix on your rdc URL. Above example is for account in https://va2.extremecloudiq.com/. So for nsight server, you need to add "-wing" to host part. The correct address is then "va2-wing.extremecloudiq.com". Moreover if you have problems, try it without "enforce-verification" clause.
